In the current society, there is a blooded profiteering chain-medical junk trading. After simple processing, medical waste is processed into plastic vegetable net bags, baskets, and even various children's toys. This will become a great safety hazard, cause serious pollution to the environment, and is very likely to become the source of the epidemic. In response to this chaos, the state promotes centralized and harmless treatment of medical waste and traces the source of waste. In this context, Guangzhou Micro Embedded provides an intelligent recycling and traceable weighing recycling program for medical waste. Inkjet Label Printer, Industrial Touch Display, Inkjet Printhead, Due to the high requirements of national standards corresponding to medical equipment, and the stability and traceability of the three types of medical equipment itself, the operating system of embedded equipment is a hard real-time operating system, and the transmission protocol for the control signal is RS-232; Parity and redundant error processing are required and prompt processing, and the encrypted system log can be recorded. In the network, the system log can be transmitted to the designated server through TCP / IP protocol, and the operation of the treatment system terminal shall be monitored by the server. Remote call function must be provided to support remote control of the system using TCO / IP protocol to facilitate remote surgery by clinicians.
Industrial Touch Screen Display - 7 Inch All-in-One Embedded Touch Panel PC Fanless WinCE Industrial Tablet PC – Weiqian Detail:
Features
Description
1.Parameters
Product model |
WLT-070R-AP20 |
Basic parameters |
● CPU: Cortex® -A8 architecture,frequency 1.0GHZ
● Memory: 512MB DDR3
● Flash:256MB NandFlash
|
Display screen |
● Size:7 inch
● Resolution:800×480
● Wide-temperature type,64K colors or 260K colors
● LCD backlight:lifetime > 25000 hours
|
Touch screen |
4-wire resistance touch screen(driver inside) |
Hardware interface |
● 4 channel isolated 3-wire RS-232 serial port(COM1,COM2,COM3,COM4),2 channel(COM1、COM2)multiplex as RS-485 bus.
● 1 channel isolated CAN bus.(optional)
● 1 channel WIFI module inside.(optional)
● 1 channel USB device interface,support ActiveSync connect to PC to exchange data and debug application.
● 2 channel USB Host interface,support mouse, keyboard, U disk ,etc.
● 1 channe
● 100M Ethernet interface.
● 1 channel SD/MMC slot,support SD/MMC card .
● 1 channel 3.5mm audio output interface.
● 1 channel DC12V~24V,industria
● power solution,higher reliability.
|
Attention |
When the serial port is connected, The GND wire of the two devices must be connected to avoid burning the serial chip and affecting communication. |
OS |
Windows CE 6.0 R3 |
Defend degree |
IP65 (front panel) |
Working environment |
● power:12V~24V DC ,600mA
● working temperature:-10~55℃
● storage temperature:-20~80℃
● working humidity:10~90%RH
|
Size |
● shell structure:plastic
● panel size:206.00 x 142.00 (mm)
● trepanning size:195.6.00 x 131.6 .00 (mm)
|
Application area |
● industrial control,detection device,instruments and meters,security monitoring,medical apparatus and instruments, intelligent terminals embedded high-end application.
● Support CAN bus network deployment.
|
Software support |
● Flash power-down protection function.
● IDE: Visual Studio 2005/2008.net(.net 2.0 Compact)、EVC++ 、 Labview development.
● Easy change the user-defined splash screen.
● Support display screen rotation (degree: 0/90/180/270)
|
2.Interface definition
1 CANL |
2 CANH |
3 GND |
4 COM3-RX of RS-232 |
5 COM3-TX |
6 COM4-RX of RS-232 |
7 COM4-TX of RS-232 |
8 COM2-485B |
9 COM2-485A |
10 GND |
11 COM1-485B |
12 COM1-485A |
2.1 RS-232 interface
4 channels,support the highest-level baudrate 115200bps. The corresponding interface in Linux system is COM1 ~ COM4. Specially COM1 and COM2 have 2 output type as RS-232 and RS-485.
2.2 RS-485 interface
The corresponding port in Win CE system is COM1、COM2. And COM1/COM2 is a multiplexing of COM1/COM2 of DB9 interface. 120 ohm(Ω) terminal resistance will be needed additionally for a bus network deployment.
2.3 CAN Bus interface
The function of Can-bus interface is optional. Also, 120 ohm(Ω) terminal resistance will be needed additionally for a bus network deployment.
2.4 Power interface
As shown in the figure:
3. Exterior size
Exterior size: 206×142 (mm) Trepanning size: 195.6×131.6(mm)
Product detail pictures:
Related Product Guide:
Weiqian's Intelligent weighing instrument, equipped with powerful smart weighing system software, can seamlessly connect with all electronic weighing instruments on the market, such as table scales, platform scales, floor scales, precision balances, explosion-proof scales, truck scales, forklift scales, Livestock scales, batching scales, electronic crane scales, logistics sorting scales, etc., provide solutions for the weighing field of various industries, and are widely used in warehouse management, logistics picking, production checkweighing, laboratory balances, construction site management, and animal husbandry Scenarios such as breeding, production ingredients, kitchen waste recycling, medical waste recycling, and industrial Internet of Things. Industrial Touch Screen Display - 7 Inch All-in-One Embedded Touch Panel PC Fanless WinCE Industrial Tablet PC – Weiqian , The product will supply to all over the world, such as: San Diego, Philippines, Iraq, Guangzhou Weiqian free to provide professional plastic tubes. ribbon. Plastic bag printing, marking equipment, can print validity date, production date, quality date, trademark, model specifications and other information content. According to the customer's site situation and customer demand for production, real-time scheme planning can be carried out to solve the problem of customer identification, improve production efficiency, reduce labor costs, and provide customers with traceability and anti-counterfeiting identification equipment and a complete set of solutions.